Specifications

3-4 888-2857-001 5/9/13
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Platinum VAX-C Series
Figure 3-3 VAX-C LCD Status Menu
ON-AIR DATA LINEAR: OK
DIG SIGNAL PATH MOD FPGA PROG: OK SUCCESS: 0
PFRU (PLL) PFRU FPGA PROG: OK MOD FPGA COMM: OK ATTEMPT: 0
UP/DOWN CONVERTER UPCONVERTER: PFRU COMM: OK MOD HPI: OK NON-LINEAR: OK
AMP PA: IF LEVEL: 757 EXT 1PPS: N/A DAC CLOCK: OK SUCCESS: 0
PA1: RF LEVEL: 2484 EXT 10 MHz: N/A MOD CLOCK: OK ATTEMPT: 0
PA VOLTAGE: 50V DOWNCONVERTER: INT 1PPS: OK MOD 4X CLOCK:OK LSB: xx dB
OUTPUT: PRE-FILTER LEVEL: 93% 54 MHz CLOCK: OK 25 MHz: ClOCK: OK USB:xx dB
FWD PWER: 50.0W POST FILTER LEVEL: 0% 10 MHz CLOCK: OK 54 MHz: CLOCK: OK SNR: 0 dB
RFLD PWR: 0.0W LO: IF PLL LOCK: OK DUC FPGA PROG: OK EVM: 0 %
VSWR: 1.0:1 LO LEVEL: 1.1 dBm RF PLL LOCK: OK DUC FPGA COMM: OK
IF LO REF: 54MHz DUC INPUT BUF: OK
GPS PWR: OK SRC BUF: OK
#SAT DETECT: 9 ADAPT DSP COM: OK
LAT: N39.956 MOD FPGA: 40C
LONG: W91.364 DUC FPGA: 47C
GPS TIME: xx:xx:xx AMBIENT: 32C
+24VDC: +24.1V
+12VDC: +11.9V
+5VDC: +4.9V
+3.3VDC: +3.3V
+1.4VDC: +1.4V
-12VDC: -12.1V
BATTERY BACK-UP BATBACKUP: NONE
TRANSMITTER I/O TCU PRESENT: INACTIVE BAT DISABLED: NO
REVISIONS SOFTWARE: BUILD VERSION: RF MUTE: INACTIVE BAT EXPIRED: NO
HARDWARE: MICROBRD: APPLICATION: RTAC RESET: INACTIVE REMAINING DISCHARGE: 0%
SIGBRD: GUI: RTAC HOLD: INACTIVE UPS VERSION: xx
PFRU BRD: BOOTLOADER: XMTR ON: INACTIVE EXPIRATION: xx
AMP CTRL BRD: DSP: XMTR OFF: ACTIVE +12VDC BAT: +12.1V
BASE I/O BRD: MOD FPGA: RESTRIKE COMMAND: INACTIVE
UDC2 BRD: DUC FPGA:
FP BRD: PFRU FPGA:
TX IO BRD: EXP FPGA:
FP FPGA:
FAULT LOG F/W, DESC, DATE, TIME SIG CPLD:
AMP CTRL CPLD:
AMP CTRL CPLD:
TX IO CPLD:
INP OPT CPLD: