Specifications

5/9/13 888-2857-001 2-15
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation / Initial Turn-On
Platinum VAX-C Series
The front panel can be removed for maintenance while the transmitter is operating but
the panel should be in place during normal operation. The 12Vdc fans can be changed
while the transmitter is operating. See Section 5.7 on page 5-23 for replacement
instructions.
NOTE:
Prior to start-up, the cooling fans should be visually checked to make sure there
are no obstructions.
Job site environmental conditions should be evaluated periodically to assure filter
cleanliness. Schedule maintenance activities to accommodate changing environmental
conditions at the site. See Section 5.8 on page 5-24 for instructions on cleaning filters.
NOTE:
Special note concerning stand alone units: Rack selection is key to maintaining
proper cooling of stand alone units. To provide proper cooling, a rack with ample
venting through the front and rear doors should e selected to ensure proper air
flow from the front and rear of the rack.