Specifications

2-4 888-2857-001 5/9/13
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation / Initial Turn-On
Platinum VAX-C Series
NOTE:
Failure to follow these installation instructions may void the warranty.
The transmitter should be placed where it will have adequate room to access the front
and rear panels. There are several drawings included in the drawing package to help
plan the transmitter placement:
STEP 1 Open the box and remove the packing material that surrounds the
transmitter.
STEP 2 Place the transmitter in position.
2.5.2 Rack Mounting Components
In many instances, VAX-C transmitter components will ship without a mounting rack.
The transmitter may be installed in customer supplied equipment racks. In these
instances, it is the customer’s responsibility to properly support and mount the
equipment in the racks. Equipment installed in racks must be properly installed on
shelves or use brackets that safely and adequately support the weight of the equipment.
!
WARNING:
EQUIPMENT RACKS AND TRANSMITTER COMPONENTS MUST BE PROPERLY
GROUNDED. SEE 2.6.3 ON PAGE 2-5 AND 2.6.4 ON PAGE 2-7 FOR GROUNDING
DETAILS.