Specifications

5/9/13 888-2857-001 2-1
WARNING: Disconnect primary power prior to servicing.
Platinum VAX-C Series
Section 2
Installation /
Initial Turn-On
2
2.1 Introduction
This section includes the information necessary for installation and initial turn on of a
Platinum VAX-C, solid state, air cooled, VHF TV transmitter. Due to the modular
nature of the VAX-C, all models have similar installation and testing procedures.
2.2 Unpacking
Upon receipt of the transmitter shipment, carefully unpack the transmitter and perform
a visual inspection to ensure that no apparent damage was incurred during shipment.
Retain the shipping materials until it has been determined that the unit is not damaged.
The contents of the shipment should be as indicated on the packing list. If the contents
are incomplete or if the unit is damaged electrically or mechanically, notify the carrier
and Harris Corporation, Broadcast Division.
2.3 Returns and Exchanges
Damaged or undamaged equipment should not be returned unless written approval and
a Return Authorization is received from HARRIS CORPORATION, Broadcast
Division. Special shipping instructions and coding will be provided to assure proper
handling. Complete details regarding circumstances and reasons for return are to be
included in the request for return. Custom equipment or special order equipment is not
returnable. In those instances where return or exchange of equipment is at the request of
the customer, or convenience of the customer, a restocking fee will be charged. All
returns will be sent freight prepaid and properly insured by the customer. When
communicating with Harris Corporation, Broadcast Division, specify the Harris Order
Number or Invoice Number.