Specifications

5/9/13 888-2857-001 1-13
WARNING: Disconnect primary power prior to servicing.
Section 1 Introduction
Platinum VAX-C Series
1.10 VAX-C Specifications
NOTE:
Specifications subject to changed without notice. Unless otherwise noted, these
specifications apply at the output of a Harris supplied mask filter.
1.10.1 General Specifications
Table 1-4 General Specifications
Item Specification
RF Output Frequency Range VHF Band III, 168 to 242 MHz
ATSC A110 Single frequency network standard for ATSC
RF Input Samples for Adaptive 1 x SMA, 50 ohms; dynamic range: -20 to +5 dBm
Transport Stream Inputs 2 x BNC, 75 ohms terminated (50 ohms connector per ASI rec.),
configurable as SPMTE 310M, DVB-ASI, or DVB-T2MI
2 x BNC, 75 ohms terminated (50 ohms connector per ASI rec.),
additional for DVB-ASI hierarchical modulation
10 MHz Reference Input 1 x BNC, 50 ohms
1 PPS Reference Input 1 x BNC, 50 ohms/Hr-2
10 MHz Reference Output 1 x SMA, 50 ohms, front access
1 PPS Reference Output 1 x SMA, 50 ohms, front access
Ethernet 1 front, RJ-45, customer access
1 rear, RJ-45, DHCP enabled network interface (SNMP)
Parallel Remote Control 1 rear, user remote
1 rear, transmitter interface
Serial Connectivity 1 rear CAN interface
1 rear RS-232
GPS Antenna Input 1 x SMA, 50 ohms, rear access (option)
RF Monitor Output 1 x SMA, 50 ohms, front access
AC Power Input Single Phase, 100 to 240 VAC, auto-ranging, +/-10%, 50/60 Hz
Power Factor >0.95