Specifications

5-62 888-2857-001 5/9/13
WARNING: Disconnect primary power prior to servicing.
Section 5 Maintenance and Alignments
Platinum VAX-C Series
5.18 Typical Test Equipment
Table 5-2 Recommended Test Equipment
Equipment Type Manufacturer Model Number Options
Harris Part
No.
(if applicable)
TV Spectrum Analyzer R&S ETL ETL-B203 RF pre-select.
FSL-B4 OCXO Ref. Freq.
FSL-B7 Nar. Res. Filters
ETL-K220 ATSC Demod.
DIV7 ETL-K208 Meas. Log
Demodulator R&S EFA instead of ETL
Spectrum Analyzer Agilent 4402 instead of ETL
Power measurement Agilent E44182B power meter with E9300B sensor, 100 uW to 3 W
Frequency
measurement
Agilent 53131A or 53181A 010 high stability time base
015 range extension to 1.5 GHz, OR
030 range extension to 3.0 GHz
Miscellaneous Test
Equipment
Bird APM-16 wattmeter, with 1W to 1kW elements
Narda Directional coupler 620-0457-000
Eagle RLB-150 RF bridge 700-1289-000
Eagle TNF-200 VHF RF notch filter 484-0300-000
Fluke 87 digital multimeter with 801-400 current probe
Optional
Adapters and
connectors
Myat 3-1/8 inch to 4-1/16 inch adaptor 620-2395-000
Dielectric 3-1/8 inch to 4-1/16 inch adaptor 620-1928-000
Myat 3-1/8 inch to 6-1/8 inch adaptor 620-2297-000
3-1/8 inch to type N adaptor 620-2859-000
Adapters and
connectors
Type N to BNC, male to female 620-0128-000
Type N to BNC, female to male 620-0547-000
BNC barrel, female to female 620-0604-000
BNC barrel, male to male 620-0564-000
SMA to BNC, male to female 620-2611-000
SMA to N, male to female 620-2562-000
SMB (push on) to BNC 620-0628-000
SMC to BNC, screw on jack to plug 620-2563-000
BNC to TNC, jack to plug 620-2821-000
BNC to TNC, jack to jack 620-2823-000
TNC to N, plug to jack 620-2824-000
TNC to N, jack to plug 620-2822-000
Attenuator 10 dB attenuator, type N, male to female 556-0074-000