Specifications

5/9/13 888-2857-001 5-45
WARNING: Disconnect primary power prior to servicing.
Section 5 Maintenance and Alignments
Platinum VAX-C Series
Figure 5-19 Programming Screen
STEP 11 The screen shown in Figure 5-19 will appear indicating that
programming has begun. This process will take several minutes. Once
programming is complete the web connection to the VAX-C will be
broken and communication with the VAX-C will cease (a yellow error
screen will be displayed).
STEP 12 When communications is reestablished a login screen will open.
NOTE:
In some instances it may be necessary to exit and then restart the Web browser to
establish a new connection.
STEP 13 Log into the VAX-C (name and password required). Use the web
browser to navigate to Tx Home>Exciter Home>Status >Revisions
screen. The new Build version will be displayed there. If Customer
Special appears as the Build Version it indicates a possible problem and
the software should be reloaded. The current modulator type can be
identified by navigating to the Tx Home>Exciter Home>Setup>Signal
Processor box.
STEP 14 End of procedure.