Specifications

5-34 888-2857-001 5/9/13
WARNING: Disconnect primary power prior to servicing.
Section 5 Maintenance and Alignments
Platinum VAX-C Series
Figure 5-13 NetAdmin Active Users Screen NetAdmin - User Management Screen
Once the desired changes have been made to the NetAdmin-User Management screen
press the Active button to return to the Active users screen where the current connection
information is provided. Access to other screens is not allowed while logged in as an
administrator. If access to other screens is desired the user must Logout and then Login
as an engineer.
5.12.4 Connection Via Front Ethernet Connector
When connecting to the VAX-C front panel RJ45 connector, the connecting computer
can be setup as a DHCP client, where the DHCP server associated with the VAX-C
front RJ45 port will assign an address to the computer. This method of obtaining a
computer address is described in Section 5.12.4.1.
The computer can also be set to Static IP mode, where its address must be assigned
manually. In this mode, the address must be assigned as 192.168.117.yyy, where yyy is
any value between 2 and 254, except 88.
When the computer has been assigned an IP address, connect to the VAX-C using the
procedure in Section 5.12.4.3.
When connecting to the VAX-C front panel ethernet port, if the computer being used
does not auto-detect for cross connection, a crossover cable must be used to connect the
VAX-C front ethernet port to the computer.