Specifications

5/9/13 888-2857-001 5-3
WARNING: Disconnect primary power prior to servicing.
Section 5 Maintenance and Alignments
Platinum VAX-C Series
!
CAUTION:
THE PA MODULE MAY BE HOT. ALLOW THE COMPONENTS TO COOL OR USE
PROTECTIVE GLOVES TO PROTECT HANDS.
STEP 3
See Figure 5-1. Remove the two screws from the rear panel on either
side of the output connector.
Figure 5-1 RF Output Connector
STEP 4 Remove the PA module screw from the right side of the chassis. This
screw threads into the L bracket attached to the PA module heat sink.
Figure 5-2 PA Module Side Mounting Screw