Specifications

5/9/13 888-2857-001 3-107
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Platinum VAX-C Series
MIP Status MIP (Mega-frame Initialization Packet) Status displays “MIP OK” if MIP
packets are detected in transport stream and they have no errors. If no
MIP packets are detected, or if there are MIP packet errors, it will display
“Error. If the input is not required then “N/A” will always be displayed.
SFN Sync SFN (Single Frequency Network) Sync displays “OK” if VAX-C in the
SFN (Single Frequency Network) mode and the mega-frame timing is
properly aligned. If in SFN mode and the mega-frame timing is not
properly aligned an “Error” will be displayed.
If not in SFN mode or if the input is not required, then “OK” is always
displayed.
MFS Status MFS Sync (Mega Frame Sync) displays “OK” if MPEG sync word 0x47 is
detected properly in transport stream input. If MPEG sync word is not
detected properly then “Error” will be displayed. If the input is not
required, then “OK” is always displayed.
Softkeys
Export Fault Log Save fault log to file for export. Use File>Save Page to save HTML or
text.
Setup Displays Setup screen.
Fault Log Displays Fault Log.
Exciter Home Displays Exciter Home screen.
Status Displays Status screen.
Figure 3-79 Xmtr Home>Exciter Home>Status>DVB-T Modulator (screen 1)
Field Explanation