Specifications

5/9/13 888-2857-001 3-91
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Platinum VAX-C Series
3.11.6 Revisions Status Screens (1 & 2)
System software revisions information is displayed on Revision Status Screens 1 & 2
below. Select Next to display Hardware Revisions screen. The most important field is
the Build Version. The Build revision indicates the software build that is currently
running on the system. If the build revision reads Customer Special then the system is
running a non-released or incomplete build.
Figure 3-57 Revisions Status Screens (1 & 2)
Software Version Software version read from chip on battery pack.
+12VDC Battery A fault occurs if the +12 volt output drops to +10 volts.
Note: The +9.6 volt output of the backup battery is converted to +12
VDC. The fault occurs when the +9.6 VDC drops to 8.3 VDC
Softkeys
Status Opens Status screen as shown in Figure 3-51 on page 3-81
Exciter Home Pressing this soft key displays Exciter Home Screen, on right Figure 3-12
on page 3-17.
Table 3-60 Xmtr Home> Exciter Home> Status > Battery Backup
Field Explanation