Specifications

3-82 888-2857-001 5/9/13
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Platinum VAX-C Series
3.11.1 Signal Processor Status Screens
Figure 3-52 Signal Processor Status Screen (1 & 2)
Table 3-55 Status >Signal Processor (1 & 2)
Field Explanation
Modulator Sub Window
FPGA Programmed Green = FPGA is programmed. Red = fault
FPGA Health Green = serial communication with Modulator FPGA is OK. Red = fault
Host Port Interface Green = communication through the Modulator Host Port is OK. Red = fault
DAC Clock Green = DAC clock is detected and deemed correct. Red = fault
Modulator Clock Modulator clock is detected and deemed correct. Red = fault
4X Clock Modulator 4X clock is detected and deemed correct. Red = fault
25MHz Green = 25MHz clock is detected and deemed correct. Red = Fault
54MHz Green = 54MHz Clock is detected and deemed correct. Red = Fault
RTAC Sub Window
FPGA Programmed Green = DUC FPGA is programmed. Red = fault
FPGA Health Green = serial communication with DUC FPGA is OK. Red = fault
DCM Lock (Digital Clock Manager) Green = DUC FPGA DCM is locked. Red = fault
Input Buffer Green = Input Buffer is OK. Red = overflow or underflow
Sample Rate Converter
Buffer
Green = Sample Rate Converter Buffer OK. Red = overflow or underflow
Adaptive DSP Health Green = Controller is communicating with the Adaptive DSP. Red = fault
Temperature (°C)