Specifications

3-64 888-2857-001 5/9/13
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Platinum VAX-C Series
Figure 3-42 DVB-T2 Setup Screens 2
Table 3-37 Xmtr Home>Exciter Home>Setup>DVB-T2 Modulator>Next (screen
2)
Field Explanation
Network Operation Select MFN (multi frequency network) or SFN (single frequency
network).
MFN mode selects operation in a multiple frequency network
(transmitters on different frequencies) which does not require
synchronization with the other transmitters in a network.
SFN mode selects operation in single frequency network (transmitters on
same frequency) which requires synchronization with other transmitters
in a network.
If SFN is to be the modulation choice then a GPS antenna is needed and
internal GPS must be selected on the PFRU set up screen.
TX ID Transmitter identifier used to address individual transmitters or modulators.
Cell ID Priority Choices are Local, T2MI L1PRE, or Indiv Address.
Cell ID (Hex) Identifies a geographic cell in a DVB-T2 network.
Network ID (Hex) This field uniquely identifies the current DVB network.
T2 System ID (Hex) This uniquely identifies a T2 system within the DVB network.
SISO/MISO Choices are SISO (single input, single output) or MISO (multiple input,
single output).
MISO Group Priority Choices are Local or TCM1.
MISO Group Number Choices are Group 1 or Group 2.