Specifications

5/9/13 888-2857-001 3-53
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Platinum VAX-C Series
3.8 Setup Screens - DVB-T Modulation
Figure 3-33 on left - DVB-T Setup on right - DVB-T Setup Screen 1
Table 3-28 Xmtr Home>Exciter Home>Setup>DVB-T Modulator (screen 1)
Fields Explanation
Transport Stream See TS input connectors and assignments in Section 2.7.4, "TS (Transport
Stream) Connections".
Power-On Input Choices are ASI 1, or ASI 2. This determines which input will be selected
first on power-up.
Active Input Choices are ASI 1, or ASI 2. This determines which input is currently the
source of data for modulation.
Switch Mode Choices are Auto (automatic) or Manual.
Auxiliary Input Choices are Yes or No. Selects whether the auxiliary input is allowed.
This needs to be set to YES in order to manually or automatically switch
to the auxiliary input.
Softkeys
ISP Pressing this soft key displays the ISP ’In-System Programming’ Screen
shown in Figure 3-15 on page 3-22. The ISP screen is used to load
software into the transmitter.
Status Displays Status screen.
Setup Displays Setup screen.
Exciter Home Displays Exciter Home screen.