Specifications

5/9/13 888-2857-001 3-39
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Platinum VAX-C Series
3.4.8 System Settings Screens
Figure 3-24 System Settings Screens
Table 3-19 Xmtr Home>Exciter Home>Setup>System Settings & >Next
Fields Explanation
Page Title Allows user to change the reference title located at the top of the screen
above the forward power bar. This title is shown on every screen.
Feature Key Enter a factory supplied feature key. Note: The new feature key will
become active only after a transmitter reboot. This can be accomplished
with the Reset key on the ISP screen.
Transmitter Model Model number is set by feature key and the modulation standard that is
loaded into the unit.
Day, Date, Time Current date and time is displayed. Settings can be changed if UTC
Source is set to None.
UTC Source Drop menu and choose: None, GPS, or NTP.
None: The Set Time window will be displayed to allow the user to set the time
manually (see Figure 3-24 on right).
UTC Offset Hrs Enter appropriate time zone offset.
UTC offset Min Enter appropriate time zone offset in minutes if applicable.
NTP Server IP
Address
The NTP Server Settings sub window allows the user to input the NTP Server IP
Address (see Figure 3-24 right). Press Set IP button to accept the new address.