User guide

---
6
Clearing blockages
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Warning: To reduce the risk of electric shock, the power cord must be disconnected
before performing maintenance/troubleshooting checks. Turn the vacuum cleaner
off and unplug from the electrical socket
!
Hose Blockages
The flexible hose may be disconnected
from the vacuum cleaner. Carefully remove
any blockages found and reconnect the
hose securely.
Accessory Blockages
Remove accessory from the hose/handle tube.
Carefully remove the blockage and return to the
cleaner.
Maintenance (Keep your Vax as good as new)
Cleaning the post-motor filter
24
‘Tap ’
!
40° C max
Removing blockages from the TurboTool (some models only)
LOCKING RING
TABS
Turn the TurboTool over and
slide off the locking o-ring.
Pivot lowering housing and
remove clog.
To re-assemble, be sure that
the tabs are engaged. Pivot
the lower housing closed. Slip
the locking o-ring into the
groove at the neck of the
TurboTool to complete
reassembly.
C90-EL/C90-PM/C90-AS/C90-CX2 UG v1.2.qxd:User guide 24/5/10 12:56 Page 6