User guide

vax.co.uk

Looking after your machine -

Removing Blockages

Clearing blockages

Hose blockages

Accessory blockages

Locking ring

Tabs

Removing blockages from the TurboTool (some models only)

Remove accessory from the hose/telescopictube. Carefully remove the blockage and return to the cleaner.

Turn the TurboTool over

and slide o the locking ring.

The exible hose may be disconnected from the vacuum cleaner. Carefully remove any blockages found and

reconnect the hose securely.

Detach lower housing

and remove blockage.

To re-assemble the TurboTool,

ensure that the tabs are engaged

and pivot the lower housing closed.

Slip the locking ring over the neck

of the TurboTool and into the

groove to nish.

WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing

maintenance/troubleshooting checks. Turn the vacuum cleaner o and unplug from the electrical socket.

IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch o the vacuum cleaner and remove

the blockage(s) before re-starting the vacuum cleaner.