User guide

Cleaning the pre-motor lter
Hold the dirt container and
twist the lid anti-clockwise.
Lift the lid to reveal the
pre-motor lter.
Lift out the pre-motor lter.
Tap excess dirt from the lter rinse under a tap and leave to dry for 24 hours.
1
2
3
!
40C Max
5
24hr
6
4
4
Post-motor lter is located
in the right side wheel.
Hold the centre of the
wheel and twist wheel
cover anti-cl ockwise.
With the wheel cover o
the post-motor lter is
easily removed.
Tap all excess dirt o the
lter. Do not wash.
1
2
3
Cleaning the HEPA post-motor lter
Turn the TurboTool over and
slide o the locking ring.
Detach lower housing and
remove blockage.
To re-assemble the
TurboTool, ensure that
the tabs are engaged
and pivot the lower
housing closed.
Slip the locking ring
over the neck of the
TurboTool and into
the groove to nish.
Locking ring
1
2
Tabs
3
Removing blockages from the TurboTool (Some models only)
6vax.co.uk
Looking After Your Machine – Filters