Operation Manual

vax.co.uk

Looking after your machine –

Removing Blockages

Clearing blockages

Hose blockages Accessory blockages

Remove accessory from the hose/telescopic

tube. Carefully remove the blockage and return

to the cleaner.

The exible hose may be disconnected

from the vacuum cleaner. Carefully remove

any blockages found and reconnect the

hose securely.

WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing

maintenance/troubleshooting checks. Turn the vacuum cleaner o and unplug from the electrical socket.

IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch o the vacuum cleaner and remove

the blockage(s) before re-starting the vacuum cleaner.

Turn the TurboTool over and

slide o the locking ring.

Lay the Turbobrush on a at surface and turn over to expose

the brushbar. Using a pair of scissors, cut through any

threads or hairs caught by the brushbar that have wrapped

around the guides.

Detach lower housing and

remove blockage.

To re-assemble the

TurboTool, ensure that

the tabs are engaged

and pivot the lower

housing closed.

Slip the locking ring

over the neck of the

TurboTool and into

the groove to nish.

Locking ring

Tabs

Removing blockages from the TurboTool (Some models only)

Removing blockages from the Turbobrush (some models only)