User guide

vax.co.uk
7
Looking after your machine -
Removing Blockages
Clearing blockages
Hose blockages Accessory blockages
Locking ring
Tabs
Removing blockages from the TurboTool (some models only)
Remove accessory from the hose/telescopictube.
Carefully remove the blockage and return to
the cleaner.
Turn the TurboTool over
and slide o the locking ring.
The exible hose may be
disconnected from the vacuum cleaner.
Carefully remove any blockages found
and reconnect the hose securely.
Detach lower housing
and remove blockage.
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing closed.
Slip the locking ring over the neck
of the TurboTool and into the
groove to nish.
Lay the Turbobrush oor head on a at surface and turn over to expose the brushbar. Using a pair of scissors,
cut through any threads or hairs caught by the brushbar that have wrapped around the guides.
Removing blockages from the Turbobrush (some models only)
WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing
maintenance/troubleshooting checks. Turn the vacuum cleaner o and unplug from the electrical socket.
IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch o the vacuum cleaner and remove
the blockage(s) before re-starting the vacuum cleaner.