User guide

user guide

dust bag & filters

OTE: Vax recommends cleaning the pre-motor filter

should it become discoloured or dirty.

4. The pre-motor filter must then be returned to the

machine before use and the retaining disc turned clockwise

to secure (Fig.7/6)

ilter cage assembly

1. Turn off the vacuum cleaner and unplug it from the

electrical outlet.

2. Unclip the retainer clips on either side of the vacuum

cleaner and remove lid. Lift out the filter cage. The filter on

the cage may be brushed to clean if dusty and replaced

with a new filter when required. (Fig.7/7)

3. The filter can then be removed from the cage by hand.

It can be re-attached by putting on a new filter. The filter

must then be attached to the cage before the machine is

used. (Fig.7/8)

Fig.7/6

Fig.7/7

Fig.7/8

Vax VCC-03 User Guide.qxd 8/8/07 16:55 Page 7