User guide

Vax VCC-03

dust bag & filters

7. Dirt Container & Filters:

Removal & Replacement

IMPORTANT: Always unplug the vacuum cleaner

from the electrical outlet before removing the

dust bag.

IMPORTANT: DO NOT use the vacuum cleaner

without ALL of the filters in place.

Dust Bag Replacement

1. Turn off the vacuum cleaner and unplug it from the

mains. Remove the hose and unclip the retainer clips on

either side of the machine and remove the lid, by lifting

from the handle. (Fig.7/1)

2. Lift out the filter cage assemble, to access the dirt

container compartment. Fig.7/2

3. R

emo

e the full dust bag and dispose. Insert a new dust

bag by aligning the downward arrow on the front of the

dust bag to the bottom of the container over the air

entrance.

NOTE: The seal ring around the dust bag

opening should cover the air entrance connector inside

the housing.

Pre-motor Filter

1. Turn off the vacuum cleaner and unplug it from the

electrical outlet.

2. Unclip the retainer clips on either side of the vacuum

cleaner and remove the lid. (Fig.7/4)

3. Rotate the filter-retaining disc clockwise to gain access

to the filter, which can then be lifted out to remove

(Fig.7/5)

Fig.7/1

Fig.7/3

Fig.7/2

Fig.7/4

Fig.7/5

Vax VCC-03 User Guide.qxd 8/8/07 16:55 Page 6