User guide

Vax VCC-03

assembly / operation

3. How to Assemble

1. Insert the flexible hose into the inlet on the main body

of the vacuum cleaner. Turn the hose clockwise until it

cannot be turned any further (Fig.3/1).

2. Push the extension tube on to the end of the handle.

The extension tubes can be used together to lengthen or

shortened by using one section of the extension tube as

required.(Fig.3/2).

3. Fit the c

ombina

tion floor head by pushing on

to the

xtension tube. (Fig.3/3).

4. How to Operate

On/Off Button

Insert the power plug into the electrical outlet. Ensure the

vacuum cleaner is switched off. Press the on/off button

located on the top of the machine to turn on and press the

button again to turn the vacuum cleaner off. (Fig.4/1)

Carpet Cleaning

For carpet and rug cleaning press the rocker switch on the

combination floor head to raise the brushes. (Fig.4/2 )

Hard Floor Cleaning

For hard floor cleaning, press the rocker switch on the

combination floor head to lower the brushes. (Fig.4/3)

Fig.4/1

Fig.4/2

Fig.4/3

Fig.3/3

Fig.3/2

Fig.3/1

Vax VCC-03 User Guide.qxd 8/8/07 16:55 Page 4