Vax careline 0870 1129 145 (UK only) Vax model number: VCW-02 www.vax.co.uk instruction manual Carpet Washer Please read carefully before using this cleaner. Always fully extend the mains cable before use. Retain for future reference.
Vax VCW-02 1. Diagram VCW-02 6 1 12 7 2 4 8 3 5 11 9 10 Fig.
user guide 2. Safety Information 22. Use extra care when cleaning on stairs. When using the carpet washer, basic safety precautions should always be observed, including the following: NOTE: Carpets should be dry 24. This appliance is not intended forvacuumed use by ! thoroughly before washing.
Vax VCW-02 3. Preparing the Machine WARNING: Use only Vax Commercial Carpet Cleaner with this machine. Using other cleaning solutions may cause excessive foaming. Excessive foam will cause the float to shut off the vacuum prematurely. ! Filling Clean Water Tank Press down on the Lid. Release Latch and tilt lid towards front of cleaner to access the tanks (Fig.3/1). Fig.3/3 Fill the rest of the Clean Water Tank with warm tap water (MAX 40°C) up to the Water Fill Line (Fig.3/4). Fig.
user guide 4. Attachments ! 5. Usage NOTE: Always turn off appliance before connecting or disconnecting attachments. Connecting Attachments Connect desired attachment by pressing tool onto the end of the attachment hose until the locking button snaps into the hole (Fig.4/1). ! IMPORTANT: Do not use the Carpet Cleaner as a dry vacuum. NOTE: Never leave unit unattended with power on. Turn OFF when emptying and filling reservoir. DO NOT oversaturate carpet or upholstery.
Vax VCW-02 Turn ON/OFF switch to the “ON” position (Fig.5/2). Fig.5/4 Fig.5/2 Emptying and Cleaning the Dirty Water Tank Hold the tool approximately 1" above the stained surface. Press the solution dispense trigger to apply cleaning solution to the stained area. NOTE: Before using hand tool attachments, it is necessary to prime the pump. Follow these steps for optimal performance: (Fig.
user guide Remove Clean and Dirty Water Tank assembly by pulling up and out of cleaner and separate Dirty Water Tank (Fig.5/6). 6. Troubleshooting ! WARNING: To reduce risk of personal injury, unplug carpet washer before servicing. PROBLEM: The cleaner won't run Cause: Power cord not firmly plugged into socket. Solution: Plug cord in firmly. Cause: Solution: Blown fuse/tripped breaker. Check fuse or breaker in home. Replace fuse/reset breaker.
Vax VCW-02 7. UK Service & Help 8. Technical Specification Vax Care 0870 1129 145 (UK only) Voltage: 220V~240V-50Hz Motor Power: 350 W Clean water tank volume: 1.7 litres Dirty water tank volume: 1 litre Cord length: 10.0m Weight: 5.4kg < 78dB (A) Noise (IEC60704-2-1): Subject to technical change without notice. Subject to technical change without notice. Subject to technical change without notice. to 5.00pm. Monday-Friday 9.00am 8.00am to 6.00pm Saturday-Sunday 9.00am to 5.
user guide This page has been left intentionally blank.
Vax VCW-02 This page has been left intentionally blank.
user guide This page has been left intentionally blank.
EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the product VCW-02 Carpet Washer is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Vax Ltd.
