Operation Manual
•Theplugmaynotbefullypushedintotheelectricalsocket.
•Checkthefuseintheplugifthisneedsreplacing,alwaysreplace
with a 13amp fuse.
•Themotorthermostatmayhavetripped.Ifthishashappened,
unplug the vacuum cleaner. Remove and empty the dirt container
andcheckthehoseforblockages.Cleantheltersandallow
the vacuum cleaner to cool for approximately 1 hour (if you have
washedtheltersyouwillneedtowait24hoursforthelters
to fully dry before putting them back into the vacuum cleaner).
•Theremaybeablockageinthehose.Pleaseremovethehose
from the vacuum cleaner, check and clear any blockages
•Emptythedirtcontainerandcleanlters.Gotothe‘Takingcare
of your machine’ pages.
•Thebrushbarmaynotbeturning.Goto‘Mybrushbarisn’t
turning?’ below.
•Iftheaccessory/toolwillnotpickup,checkandclear
any blockages.
•Ifthevacuumcleanerismakingawhistlingnoise,pleaseremove
the dirt container open the bottom and clean the seals. Replace the
dirt container and retry.
•Ifthereisanairsuckingnoisefromthetopofthedirtcontainer,
thiswouldindicateablockageinthemachine.Goto‘Whywon’tthe
vacuum cleaner pick up?’ above.
•Thebrushbarmaynotbeswitchedon,pleasecheckthebrushbar
on/o switch.
•Ifthevacuumcleanerisnotreclinedthebrushbarwill
automatically switch o.
•Iftheredlightisashingthebrushbarmaybejammed.Clearany
blockages for further help go to the ‘Let’s talk technical’ pages.
•Tocheckthebelt,goto‘Changingthebelt’onthe‘Let’stalk
technical’ pages.
SolutionProblem
Warning: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance
/troubleshooting checks.
What to do if it goes wrong Getting in touch
Why does my vacuum
cleaner have no power?
Why won’t the vacuum
cleaner turn on?
My brushbar
isn’t turning?
My vacuum cleaner
is making an
excessive noise?
*CallsarechargedattheUKlocalrate.Pleasemakeanoteoftheserialnumberandmodelnumberofthevacuumcleaner
before calling.