Operation Manual

Always switch o and unplug the vacuum
cleaner from the electrical socket before
assembling, opening or emptying the
dirt container, or before connecting/
disconnecting the attachments.
WARNING
Unclip the dirt container
lid to open.
Remove the post-motor
lterbyunclippingitfrom
the body of the vacuum .
Cleaning the pre-motor lter
Cleaning the HEPA post-motor lter
Emptying and cleaning the dirt container
Taking care of your machine Taking care of your machine
Press dirt container
release button to remove
the dirt container.
Hold dirt container over a
bin and press dirt release
button to open, allowing
dirt to fall out.
Liftlidtoaccesslter.
Taplterclean.
Unclip the dirt container
lid to open.
Lift lid to access
inner cyclones.
Removelter.
Tap
Tap
Tap
Lift out the inner cyclones.
Taplterclean.
Hold cyclones/separator
over bin and tap to
remove dirt and debris.
Wash in water 40˚C max and
leave for at least 24 hours or
until dry before replacing into
the machine.
24hr
40°C
max
IMPORTANT: Forbestcleaningresultsltersrequirecleaningatleasteverythreemonths.
Donotuseyourvacuumcleanerwithoutalloftheltersinplace.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat
will automatically turn the unit o. For further help go to the ‘Why to do if it goes wrong’ page.