Technical data

Figure 3–5: Select Single Device Test Menu

MAIN MENU Release nnn Version xx.xx

SELECT SINGLE DEVICE TEST

Select the device number to be tested. The functional tests

will be run followed by the exercisers for 4 minutes.

1 - CPUA - MicroVAX CPU

2 - MEMA - MicroVAX memory system

3 - PDIA - SHAC DSSI Subsystem

4 - SGCA - Second Generation Ethernet Controller

5 - No Dg TKA - Diagnostic not loaded.

Type the number; then press the RETURN key,

or type 0 and press the RETURN key to return to the Main Menu. >

NOTE: Because of the similarity of some communication options, MDM sees

them as the same device. A CXA16 and CXB16 appear the same to MDM. A

generic device name, DH–CX0, is listed for such options, and the last letter

in each name shows the difference. For example, DH–CX0A indicates one

option, DH–CX0B a second, and so forth.

Select a device for testing by typing its number and

Return

After you press

Return

, your system conﬁgures the device diagnostics and

testing begins. If the device passes the functional test, a message to that

effect appears and the exerciser test begins. The exerciser test runs for

approximately 4 minutes.

Figure 3–6 shows an example of a successful test.

Running the MicroVAX Diagnostic Monitor (MDM) 3–15