Technical data

3.5.3 Display the System Utilities Menu Option

The Display the System Utilities Menu option displays the System Utilities

Menu. If system utilities in addition to the IOADDRES function are

available on your system, they are listed on that menu.

After you select this option, the diagnostics are prepared for testing. If this

is the ﬁrst option you selected, the diagnostics are loaded. Loading takes

several minutes. After loading completes, you are prompted to press

Return

After you press

Return

, the System Utilities Menu appears. Figure 3–4 shows

that menu for a system with two RRD-series drives.

Figure 3–4: System Utilities Menu

MAIN MENU

SYSTEM UTILITIES

Utility selections are:

1 - IOADDRES

2 - RRAA - Update drive unit number for RRD40 controller A.

3 - RRAB - Update drive unit number for RRD40 controller B.

NOTE: If your system does not have an RRD-series drive connected to a

KRQ50 controller, only one function, IOADDRES, is available.

Select a function by typing its number and

Return

3.5.3.1 IOADDRES Function

NOTE: The IOADDRES function is for users of Industrial VAX systems. It

is described in the Industrial VAX troubleshooting manual.

The IOADDRES function gives you a list of standard CSR addresses and

interrupt vectors that MDM uses in testing devices. The ﬁrst available CSR

and interrupt vector for conﬁguring devices with a nonstandard address is

also given. IOADDRES does not look at devices on the bus; it lists devices

supported by Digital Customer Services.

The devices in your system were conﬁgured at the factory. Any new

devices added to your system should be conﬁgured by a Digital service

representative.

Running the MicroVAX Diagnostic Monitor (MDM) 3–13