Technical data

6. Enter them as shown below.
NOTE: The passwords shown are samples. You should enter your own
passwords. Remember to record them. If you forget a password, you
cannot log in.
Enter new password for account SYSTEM: PANCAKES
Return
Re-enter the password for account SYSTEM: PANCAKES
Return
%UAF-I-MDFYMSG, user record(s) updated
Enter new password for account SYSTEST: BRATHWURST
Return
Re-enter the password for account SYSTEST: BRATHWURST
Return
%UAF-I-MDFYMSG, user record(s) updated
Enter new password for account FIELD: ZIRHUMBA
Return
Re-enter the password for account FIELD: ZIRHUMBA
Return
%UAF-I-MDFYMSG, user record(s) updated
Your system verifies the passwords and rejects any that can be easily
guessed. The following status messages are displayed if the passwords
are acceptable.
%VMS-I-PWD_OKAY, account password for SYSTEM verified
%VMS-I-PWD_OKAY, account password for SYSTEST verified
%VMS-I-PWD_OKAY, account password for FIELD verified
Then the following status message is displayed.
Creating RIGHTS database file, SYS$SYSTEM:RIGHTSLIST.DAT
Ignore any messages of this type.
%SYSTEM-F-DUPIDENT, duplicate identifier
The following status message is displayed when the FIS setup
procedure completes.
%UAF-I-RDBDONEMSG, rights database modified
Then the system displays messages that remind you to perform certain
tasks after the software is installed.
• Register any Product Authorization Keys (PAKs).
• Back up the system disk.
• Tailor the system disk.
Finally, the system displays the following message, followed by other
status messages.
Running AUTOGEN -- Please wait
Starting and Modifying VMS Factory-Installed Software A–9