Technical data

8.5 Connecting the Ground Cable
Connect the Ground cable (12–13756–A8) to the Ground Wire Out bolt.
Figure 37: Connecting the Ground Cable
Feed Cable Under System
and Through Opening
MLO-006578
The Ground Wire Out bolt is on the power supply. It is to the right of the
three Power Bus connectors.
9 Connect the KZQSA Internal Cable, If Required
The KZQSA internal cable connects the KZQSA module to your system.
If a TLZ04 tape drive is not installed in your system, skip to step 10.
NOTE: Save the KZQSA internal cable until you are sure that a KZQSA
module will never be installed in your system.
If a TLZ04 tape drive is installed in your system:
1. Find the KZQSA In connector shown in Figure 38 and the KZQSA
internal cable (BC06P–2F) shipped with your system.
56 VAX 4000 Model 200 (BA430) Installation