Technical data

Contents
Preface vii
1 Verify Site Preparation ............................. 1
2 Check the Shipment. . .............................. 1
3 Position the System . . .............................. 4
4 Open the System Doors ............................. 5
5 Install the Console Terminal . . . ...................... 7
5.1 Perform Setup Operations . . . ...................... 7
5.2 Connect the Terminal to the System ................. 8
6 Set the System Controls............................. 10
7 Connect Additional Devices to the System . . ............. 15
7.1 Connecting Terminals and Serial Printers ............. 18
7.2 Connecting Parallel Printers to the System ............ 21
7.3 Connecting Synchronous Modems to the System . . . ..... 21
7.4 Connecting Asynchronous Modems to the System . . ..... 22
7.5 Connecting an Internal Modem to Telephone Lines . ..... 24
7.5.1 DFA01 Modems . .............................. 24
7.5.2 RJ11C/CA11A, RJ12C/CA12A, and RJ13C/CA13A
Telephone Service.............................. 24
7.5.3 RJ41S/CA41A and RJ45S/CA45A Telephone Service . . . 28
7.5.4 Setting Up Terminal Lines . ...................... 32
7.6 Connecting to an Ethernet Network at the CPU Cover
Panel . . . ...................................... 32
7.6.1 Making a ThinWire Network Connection at the CPU
Cover Panel .................................. 34
7.6.2 Making a Standard Network Connection at the CPU
Cover Panel .................................. 37
7.7 Connecting to an Ethernet Network at the DESQA Module 39
7.7.1 Making a ThinWire Network Connection at the DESQA
Module ...................................... 40
7.7.2 Making a Standard Network Connection at the DESQA
Module ...................................... 46
iii