Technical data

5. Check the settings on the tape drive.
• If a TK-series tape drive is installed in your system, check the
setting of the Cartridge Insert/Release handle shown in Figure 8.
Make sure that handle is closed (pushed in).
Figure 8: System Controls and Indicators — TK-Series Tape Drives
Cartridge
Insert/Release
Handle
MLO-006525
• If a TF85 tape drive (Figure 9) is installed in your system:
Make sure the Cartridge Insert/Release handle is closed
(pushed in).
Verify that a bus node ID plug is inserted into the drive.
14 VAX 4000 Model 200 (BA430) Installation