Technical data

3. Check the settings on each RF-series Integrated Storage Element (ISE).
One is shown in Figure 7.
• Write-Protect button — Make sure that button is in the out (write-
enabled) position.
• Run/Ready button — Make sure that button is in the in (on-line)
position.
Verify that a bus node ID plug is inserted into each ISE.
4. Check the settings on the CPU cover panel shown in Figure 7.
• Power-Up Mode switch — Set that switch to the Language Inquiry
mode (uppermost position, indicated by a human profile).
• Break Enable/Disable switch — Set that switch to break enabled
(up, indicated by a dot inside a circle).
12 VAX 4000 Model 200 (BA430) Installation