Technical data

1 Verify Site Preparation
You may have received a copy of the system Site Preparation manual, which
describes the physical, environmental, and electrical requirements for your
system. A copy of that manual is also included in your Customer Hardware
Information Kit. If you have not done so, read that manual and follow its
instructions for preparing your site.
• The installation instructions that follow assume your site meets all the
requirements listed in the Site Preparation manual.
• These instructions also assume all terminal data lines, telephone lines,
and network lines that you plan to connect to your system are in place
and clearly labeled.
You will need the following tools to install your system. They are not
included in your shipment.
• Scissors
• Flat blade screwdriver
• Phillips (cross point) screwdriver
• Adjustable wrench
If you are installing a dual-host system, you must repeat each step in the
installation procedure for each host.
2 Check the Shipment
Before unpacking your system, find the Product Delivery Document. It is
attached to the outside of a carton and is labeled with a blue "i" symbol.
That document lists your order and how it breaks out into the items
shipped.
Your shipment may include several cartons:
• One carton contains the system.
• A smaller carton contains the console terminal, if ordered.
• Another carton contains hardware documentation, software documen-
tation, and software licenses. That carton also contains system software
and diagnostic software if you ordered those items separately.
VAX 4000 Model 200 (BA430) Installation 1