User's Manual

0 5 0 6
GETTING STARTED
1. Charging & Powering Baby Monit or
1) Connec t the monito r adapter to the monito r and a power outlet.
2) Unplug the unit when its power indic ator turns off, indicating a full c harge.
3) Press the Power button on the monito r to power on with the power indic ator
lighting green.
2. Powering Camera
1) Connec t the camera to power sourc e via the Mic ro - USB c able and
c amera adapter.
2) Slide the Power Switch on camera to power on. Make sure the power
indic ato r light is green.
· Only use the power adapters included in the pac kage.
· Do not plac e the c amera and power cord within the reac h of your
baby.
It’s strongly rec ommended to use a screw and sc rew anc hor. Don’t
release the c amera until yo u’re sure it is firmly mounted.
· Once they’re paired successfully, the c amera number with ic on
will be shown at the top left.
· Mic rophone feedbac k might oc cur when the monitor is too clo se
to the camera. Please keep them at least 1.5m / 4.9ft apart.
· It is rec ommended to pair in the baby's ro om, or wherever you
intend to plac e the c amera.
3. Pairing t he Baby Monit or & the Camera
By default, one c amera has been paired with the monito r when manufac tured.
When yo u power on the mo nito r and camera, the two will automatic ally pair.
To add more c ameras, press the Pair Button at the bo ttom of the c amera,
press Menu butto n, selec t through - > - > , and then the monito r will
auto- pair with the c amera.
4. Placing t he Camera
Plac e the c amera 1.5- 2m / 4.9- 6.6ft away from your baby for safety reaso n
and fo r a better view when in night visio n mode.
5. Wall Mounting Camera
1) Selec t the spot to mount the c amera, keeping it beyond your baby’s reac h.
2) Insert the sc rew (not inc luded) pre- installed on wall into the mo unting hole
of the camera.
1
1.5- 2m / 4.9- 6.6ft