Technical information

or

Defective component:
A17 Control Unit - Immobiliser
Important:
Reset concerned control unit (engine or immobiliser control unit) with diagnostic
tester before replacing. Select immobiliser in the diagnostic tester and call up the
corresponding test in the menu ADDITIONAL FUNCTIONS. Ensure that both
control units are never reset and replaced at the same time.
E10
-
Result: Short to Ground

Short circuit to ground between:
A17 Control Unit - Immobiliser
Wiring harness connector (wiring harness side) terminal 7
&
A5 Control Unit - Motronic
(Wiring Harness Connector X31 )
Wiring harness connector (wiring harness side) terminal 2
or

Defective component:
A17 Control Unit - Immobiliser
Important:
Reset concerned control unit (engine or immobiliser control unit) with diagnostic
tester before replacing. Select immobiliser in the diagnostic tester and call up the
corresponding test in the menu ADDITIONAL FUNCTIONS. Ensure that both
control units are never reset and replaced at the same time.
E11
-
Invalid / not supported vehicle configuration

The selected Checking Procedure is not valid for this vehicle configuration.
C-06 - Transponder Car Key Circuit
T01
-
Check: Diagnostic Trouble Code stored
Work Order Description Nominal Value
Is the following Diagnostic Trouble Code stored?
B3056
No Transponder Key Programmed
B3060
Unknown Transponder Key
Page
58
of
63
12/25/2005
file://C:\Program%20Files\cosids\DATA\TMP\TmpPrn359232138.HTM