Technical information

Before working on the pyrotechnical
system:
Ignition off
Disconnect and mask battery negative
terminal
Wait 1 min until the capacitor in the control
unit has discharged.

Disconnect wiring harness connector from:
A1 Control Unit - Airbag

Connect wiring harness connector to:
G1 Battery

Check the following component for proper
operation:
Fuse of the fused jumper wire
Note:
Note:
To avoid a Power Sounder activation,
disconnect ground cable from battery within 15s
after switching off ignition.
Yes:E07
No:T11
T11
-
Check: Vehicle Configuration
Is the following information correct for the actual vehicle?
Z 22 SE
Yes:E08
No:T12
T12
-
Check: Vehicle Configuration
Is the following information correct for the actual vehicle?
Z 20 LET
Yes:E09
No:E10
T13
-
Check: Component
Work Order Description Nominal Value

Ignition OFF

Insert new fuse FB7 and then check the
fuse for proper operation.

Ignition ON
Test okay?
Yes:E13
No:T14
T14
-
Check: Vehicle Configuration
Is the following information correct for the actual vehicle?
Z 22 SE
Page
47
of
63
12/25/2005
file://C:\Program%20Files\cosids\DATA\TMP\TmpPrn359232138.HTM