Technical data

OPEL MOVANO (X62)

149 – WIRING PRE-FIT FOR TRABUS

Note:

Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of

up-to-date data on body guidelines (online body guidelines). Data status August 2012

Before working on the vehicle, refer to the “Electrical Connections” sheet.

The TRABUS option is used to provide

- Two specific power fuses in the engine compartment connections unit (BIM)

- A specific fuse box in the engine compartment connections unit (BIM)

- An optional fuse/relay box (BFRO) in the right-side dashboard area

- Two standby connectors in the dashboard area (centre, below the radio)

- A standby connector in the right-side dashboard area

- Two standby connectors in the right-side B pillar (lateral area).

1. Engine compartment area connectors

Two fuses dedicated to the TRABUS option (F3 and F6) are located in the power fuse strip (777AB).

Fuse Box 260BA is specific to the 16-seater BUS version.

These fuse boxes are in the engine compartment connections unit (BIM) located in the engine

compartment.

777AB

260BA