Technical data

OPEL MOVANO (X62)
140 – CONNECTION TO THE POSITIVE BATTERY TERMINAL
Note:
Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
up-to-date data on body guidelines (online body guidelines). Data status June 2009
4. Wiring protection
Use a category 3 resin, lightweight felt or tape-type protection in the engine compartment and in the
under-body and category 1 to 3 for the other sections not subjected to high temperatures (see “Wiring”
sheet).
Since the split annular sheathing type protection is abrasive and may cause corrosion (paint wear) and
noise (in hollow bodies) it must be immobilised.
There must be no contact between the wiring and the brake or fuel pipes.
If the original wiring is near to a split annular sheath, a spacer (double finger clip grip) must be added in
order to avoid any contact (risk of wear and short circuit).
95