Technical data

OPEL MOVANO (X62)
151 – STOP & START
Note:
Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
up-to-date data on body guidelines (online body guidelines). Data status August 2012
The 'STOP & START' (= S&S) option controls the automatic stopping of the engine when the vehicle stops
and automatic restarting when a deliberate restart is detected, in order to optimise fuel consumption and
pollution.
The 'STOP & START' option is available on 2.3 dci engines (M9T front- and rear-wheel drive, 100hp and
125hp.
The 'STOP & START' option is incompatible with the following options: M1F (chapter 63.3), KPD (chapter 104),
KC6 (chapter 105), WRF (chapter 106), UF3 (chapter 111), additional heating, additional air conditioning.
N.B:
The ‘STOP & START’ option can be deactivated temporarily via a switch (the function is automatically
reactivated each time the engine is switched on)
When an automatic stop occurs, the following pictogram appears on the instrument panel:
1. Operating conditions
1.1. To cause the engine to stop automatically
 Clutch pedal released
 AND vehicle in neutral
 AND speed threshold (~ 4 km/h) OR distance threshold (~25 m) exceeded since the last
automatic stop
 AND no parking manoeuvres (reverse gear not engaged)
 AND vehicle speed slower than or equal to 3 km/h
 AND bonnet closed
1.2. For restarting in automatic mode
 Clutch pedal action AND neutral
 OR Clutch fully pressed
 OR S&S switch pressed
1.3. For restarting in downgraded or safety mode
 Outside temperature (below approx. 0°C or above approx. 30°C)
 Battery not sufficiently charged
 Vehicle speed > 7 km/h (on a slope)
 Repeated presses of the brake pedal or need for the braking system
Note:
For more details, refer to the Vehicle User Manual
111