Technical data

OPEL MOVANO (X62)
150 – ADDITIONAL LOCK WITH 3-BUTTON KEY
Note:
Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
up-to-date data on body guidelines (online body guidelines). Data status August 2012
For a non-Opel electric lock, the electrical actuator properties set out in the table below must be complied
with.
16-way connector
Pin Function
1 Analogue door closing control signal 2
2 Logical boot lock switch information signal 0.35
3
Delayed +12 V 2 A power supply for interior lights, controlled by the
passenger compartment ECU (UCH)
0.5
4 Left lateral side light 3A power supply 0.5
5 + right-side rear speaker feed 1
6 + left-side rear speaker feed 1
7 'Engine running' information, 10A fuse shared by channels 7 and 8 1.5
8
+ 12 V load shed current distribution power supply, 10A fuse shared
by
channels 7 and 8
1.5
9 Analogue door opening control signal 2
10 Third stop light 5A power supply 0.5
11
Progressive earth for 2A interior lights, controlled by the passenger
compartment ECU (UCH)
0.35
12 Right lateral side light 3A power supply 0.5
13 - right-side rear speaker feed 1
14 + left-side rear speaker feed 1
15 Reserve
16 Analogue door deadlocking signal 2
Channels 1, 9 and 16: the signals can only be used to control standard locks and only have sufficient
capacity for three locks.
For more than three locks, a relay must be used.
109