Technical data

Keys, doors and windows 27
2. Press button in front of the
courtesy light (with ignition off);
LED in the hazard warning
flashers button flashes for
a maximum of 10 seconds.
3. Close doors.
4. Activate the anti-theft alarm
system. The LED illuminates.
After approx. 10 seconds, the
system is armed. The LED flashes
until the system is deactivated.
Light-emitting diode (LED)
During the first 10 seconds of anti-
theft alarm system activation:
LED
illuminates
= Test, ignition delay,
LED
flashes
quickly
= Door, load
compartment or
bonnet open, or
system fault.
After the first 10 seconds of anti-theft
alarm system activation:
LED flashes
slowly
= System active.
LED illuminates
for approx.
1 second
= System
deactivated.
Seek the assistance of a workshop in
the event of faults.
Deactivation
Press button q on radio remote
control or switch on ignition.
If there is a fault in remote control, turn
key in driver’s door lock toward front
of vehicle as far as it will go.
If the alarm is triggered when the
driver’s door is opened, deactivate
the anti-theft alarm system by
switching on the ignition.
Opening and closing tailgate/
leaf doors with activated anti-
theft alarm system
To unlock:
1. Tailgate:
Turn key clockwise all the way
past the horizontal position. The
tailgate is unlocked and
monitoring of the passenger
compartment and vehicle
inclination are disabled.
Leaf doors:
Turn key anti-clockwise all the
way past the vertical position. The
leaf doors are unlocked and
monitoring of the passenger
compartment and vehicle
inclination are disabled.
2. Open the tailgate or leaf doors.
3. Close the tailgate or leaf doors.