Infotainment Manual Model Year 2014 Edition: August 2013 KTA-2731/2-VX-en 0-1 VAUXHALL Combo Infotainment Manual Model Year 2014 Edition: August 2013 KTA-2731/2-VX-en
Contents Introduction .................................... 2 Radio ........................................... 22 CD Player .................................... 28 AUX input ..................................... 32 USB port ...................................... 34 Voice recognition ......................... 39 Phone .......................................... 47 Index ............................................
2 Introduction Introduction General information Infotainment system General information ....................... 2 Theft-deterrent feature ................... 4 Control elements overview ............ 6 Usage .......................................... 12 Tone settings ............................... 16 Volume settings ........................... 17 1) Only Radio with CD / MP3 player. The Infotainment system provides you with state-of-the-art in-car infotainment.
Introduction Note Not all Handsfree phone system functions are supported by every mobile phone. The possible phone functions depend on the relevant mobile phone and network provider. Refer to the operating instructions in your mobile phone handbook or consult your network provider. The Media player allows you to play and control digital audio stored on a USB device. External data storage devices, e.g. iPod or MP3 player can be connected to the Media player via the USB port.
4 Introduction Theft-deterrent feature Security system The Infotainment system is equipped with an electronic security system for the purpose of theft deterrence. The Infotainment system functions only in your vehicle and is therefore worthless to a thief. Security code A 4-digit security code (supplied separately) must be entered upon first use of the Infotainment system and after prolonged interruptions to the power supply, to unblock the Infotainment system.
Introduction 3. Select Advanced features using R / S, and press SRC/OK. 4. Select System code using R / S, and press SRC/OK. The 8-digit identification code is shown on the display. Note The 8-digit Handsfree system identification code is unique to your Handsfree system and cannot be changed. The identification code can also be accessed using voice recognition 3 39.
6 Introduction Control elements overview Infotainment system controls - Radio with CD player
Introduction 1 ON/OFF ................................ 12 Long press: Manual station search ........................ 23 Rotate: Adjust volume ........... 17 CD player - Short press: Skip to previous/next track .... 29 Short press: Switch on .......... 12 Long press: Switch off .......... 12 Radio - Short press: Mute/ unmute .................................. 22 2 3 4 5 6 7 CD player - Short press: Pause/unpause ..................... 29 BAND - Short press: Change waveband ................
8 Introduction Infotainment system controls - Radio with CD / MP3 player
Introduction 1 2 3 4 5 m ON/OFF: Switch on / switch off ............................... 12 FM: Change audio source to FM radio ............................ 22 7 8 Radio - Press: Manual radio station search .............. 23 Switch FM band selection (FM1, FM2, FM Autostore) .... 22 AM: Change audio source to AM radio ............................ 22 Switch AM band selection (AM1, AM2) ........................... 22 MEDIA: Change audio source (CD player, Media player, AUX) ..........................
10 Introduction Steering wheel controls
Introduction 1 Â / MENU ............................. 52 Mute ringtone for incoming calls ....................................... 47 Short press: Access menus . . 12 Message reader - Interrupt reading of a text message .... 52 Short press: Confirm menu options ........................ 52 Voice recognition Interrupt a voice message .... 39 Phone - Short press: Accept call ............................. 52 Short press: Change phone conversation during call .........................................
12 Introduction Usage Control operations for Radio with CD player: The Infotainment system is equipped with Radio and CD player functions and various adjustable radio and audio settings. The Infotainment system is controlled via a rotary knob, function buttons, and the menus shown on the display. Switch on / switch off Press the ON/OFF rotary knob to switch the Infotainment system on. The previously used audio source is activated.
Introduction Modes of operation Radio Operate the Radio using the function buttons: ■ Press SRC to change the audio source to radio. ■ Press BAND repeatedly to switch waveband selection (FM1, FM2, FMT Autostore, AM). Press and hold BAND to Autostore stations. ■ Press the Station buttons 1...6 to recall a stored radio station. Press and hold 1...6 to store a radio station. ■ Press _ or 6 to search radio stations. Using the Radio 3 22.
14 Introduction Mute / pause Press the MUTE button to mute the Radio or pause the CD player or Media player. Mute or Pause is shown on the display. To unmute/unpause, press MUTE again. Note Adjusting the volume automatically cancels the mute/pause function. Speed dependent volume When speed dependent volume is activated (3 17), the volume is adapted automatically to compensate for road and wind noise.
Introduction Control operations for Handsfree system CD 50 Multimedia Reader: The Handsfree system is equipped with steering wheel controls for Bluetooth phone, SMS Message reader and Media player operation and for activating Voice recognition. Volume Press < or ] to adjust the volume. The current setting is shown on the display. Mute / pause Press à / ESC to mute phone calls and ringtones or pause the Media player. Mute or Pause is shown on the display. To unmute/unpause, press à / ESC again.
16 Introduction Using the Message reader 3 52. Media player The most important Media player functions are operated as follows: ■ Select tracks: Press R or S. ■ Change the audio source to Media player: Press repeatedly SRC/OK. Using the Media player 3 36. Voice recognition The most important Voice recognition functions are operated as follows: ■ Activate voice recognition: Press s. ■ Interrupt a voice message and deactivate voice recognition: Press à / ESC.
Introduction Adjust values with button _ or 6. Changes are saved and menus are exited automatically after a brief period. ■ Front ■ OFF Choose the desired setting using _ or 6. Bass and treble Select Bass or Treble. Adjust the values with _ or 6. Equalizer Select EQ and choose from: ■ Classic ■ Jazz ■ Rock ■ USER Choose the desired setting using _ or 6. Volume distribution between right left Select Balance. Adjust the value with _ or 6. Volume distribution between front rear Select Fader.
18 Introduction During a traffic announcement, temporarily adjust the volume level by turning the ON/OFF rotary knob. If the volume is adjusted during a traffic announcement, the new volume level (shown on the display) will only be kept at this level while the announcement is in progress. The volume will then revert back to the level prior to the announcement. Emergency announcements During an emergency announcement, the volume will be automatically adjusted in the same way as the TA function.
Introduction Traffic announcements (TA) With the TA function activated (shown on the display) 3 25, it is possible to receive traffic information at a predefined minimum volume even with the radio volume off.
20 Introduction AUX input volume adjustment This function enables you to align the volume of the AUX source, depending on the portable player, to the one of the other sources. The volume of the external audio source connected to the AUX input, can only be operated via the controls on the audio source itself. It is not possible to adjust the volume via the Infotainment system or the steering wheel controls.
Introduction Radio on vol. – Limit on: ■ if the previous volume level is equal to or higher than the preset max. value / equal to or lower than the preset min. value, the radio will come on at the max./min. volume ■ if the volume level is between the preset min./max. values, the previous volume will be resumed Radio on vol.
22 Radio Radio Usage Radio reception Usage .......................................... 22 Station search .............................. 23 Autostore lists .............................. 24 Radio data system (RDS) ............
Radio Control buttons Radio with CD / MP3 player: The most important buttons for control of the radio are: ■ m / ON/OFF: Power on / off ■ FM: FM waveband selection / Automatic station storing (Autostore) ■ AM: MW waveband selection ■ MUTE: Volume activation / deactivation (Mute/pause) ■ AUDIO: Audio menu activation settings (Bass, treble, balance, fader, loudness, audio delay, equalizer) ■ MENU: AF switching, traffic information, regional mode, speed volume, radio off mode, system reset ■ _ / 6: Automatic
24 Radio Radio with CD / MP3 player: Press the R or S buttons on the Infotainment system: ■ Press briefly and repeatedly: to start a manual search for the next receivable station ■ Press and hold: to start fast searching in the required direction ■ Release: tuning will stop and the Infotainment system display will show the current station frequency Autostore lists Autostore function Radio with CD player: The FM waveband is divided into sections: FM1, FM2 and FMT; the FMT reception band being reserved for
Radio Manual station storing To store an individual station, select the waveband (AM or FM) and station, then press the desired button 1...6 on the Infotainment system until an audible signal sounds, confirming that the station has been stored to the appropriate button. A total of 6 stations per waveband can be stored individually. Recalling a station Select the waveband (AM or FM), then briefly press the desired station button 1...6 to recall a stored station.
26 Radio Alternative Frequency (AF) mode With the AF function activated, the radio automatically tunes into the station with the strongest signal broadcasting the same programme. While driving, you can continue to listen to the same station without having to change the frequency when you change zones. If the AF Switching function has been activated and the radio is not able to receive the tuned station, the radio will activate an automatic search, during which FM Search will be shown on the display.
Radio Traffic Programmes (TP) mode The TP function enables the user to find only those stations that regularly broadcast traffic announcements1). When this function is active, TP will be shown on the display. In some countries there are radio stations that do not broadcast traffic information even with the TP function active. Regional (REG) mode At certain times, some RDS stations broadcast different programmes regionally on different frequencies.
28 CD Player CD Player General information ..................... 28 Usage .......................................... 29 General information The Infotainment system's CD player can playback audio CDs. Radio with CD / MP3 player only: The CD player can also playback MP3 CDs. Important information about audio CDs and MP3 CDs Caution Under no circumstances place DVDs, single-CDs with a diameter of 8 cm or shaped CDs in the audio player. You must not put any stickers on CDs.
CD Player ■ Put CDs back in their sleeves immediately after removing them from the CD player, in order to protect them from dirt and damage. ■ Dirt and liquids on CDs can smear the lens of the audio player inside the device and cause faults. ■ Protect CDs from heat and direct sunlight. The following restrictions apply for MP3 CDs (Radio with CD / MP3 player only): ■ Only MP3 files can be read. Other compressed audio file formats cannot be played.
30 CD Player Removing a CD Press the d button: The CD is pushed out of the CD slot. If the CD is not removed after ejection, it will be drawn back in again automatically after a brief period. The sound system will then resume automatically to the radio mode. Radio with CD / MP3 player: Switch on the Infotainment system and push the CD with the printed side up into the CD slot until it is pulled in. When the CD is loaded, CD Reading will be shown on the display.
CD Player ■ Title ■ Author ■ Album Removing a CD Press the d button: The CD is pushed out of the CD slot. If the CD is not removed after ejection, it will be drawn back in again automatically after a brief period.
32 AUX input AUX input General information Radio with CD / MP3 player General information ..................... 32 Usage .......................................... 32 Usage Press the MEDIA button repeatedly on the Infotainment system to activate the AUX mode, then switch on the external audio device. Caution Before connecting or disconnecting an auxiliary device, e.g.
AUX input recording volume, there may be a delay before the audio source is heard.
34 USB port USB port General information Radio with CD / MP3 player General information ..................... 34 Playing saved audio files ............. 36 A USB port is available for the connection of external audio sources. Note The socket must always be kept clean and dry. An MP3 player, USB device or an iPod can be connected to the USB port. A connected external audio device allows you to play digital audio that belongs to a certain category, e.g. by artist or music genre.
USB port External audio devices and USB drives The USB port supports the following audio formats: ■ WMA: Supports WMA version 1 and WMA version 2 standards. ■ MP3: MPEG-1 Layer 3 - sampling frequencies 32 kHz, 44.1 kHz and 48 kHz. MPEG-2 layer 3 - sampling frequencies 16 kHz, 22.05 kHz and 24 kHz. Supported bit rates: 16 kbps, 32 kbps, 64 kbps, 96 kbps, 128 kbps and 192 kbps. MP2.5 extension (sampling frequencies 8 kHz, 11.025 kHz and 12 kHz) is also supported.
36 USB port Playing saved audio files The Media player detects when a USB audio device is connected to the USB port and a library is created and displayed automatically after the ignition is switched on. The Media player has only one library. When a new USB device is inserted a new library is created, replacing the existing one. Once connected, it is only possible to use the steering wheel controls, Infotainment system controls and voice commands to operate the external audio device.
USB port Press < or ] on the steering wheel controls. Pause / unpause To pause the Media player: ■ Press button à / ESC on the steering wheel - or ■ Press button MUTE on the Infotainment system. To unpause the Media player: ■ Press button à / ESC again - or ■ Press button MUTE again. Note The audio source cannot be changed while the current audio source is on mute / pause. Play tracks in a random order To temporarily play all tracks in a random order: 1. Press  / MENU. 2.
38 USB port 4. Select SHUFFLE and press SRC/ OK. 5. Select ON or OFF. Repeat play To set the Media player to play tracks in a continual loop by default: 1. Press  / MENU. 2. Select MEDIA PLAYER and press SRC/OK. 3. Select SETTINGS and press SRC/OK. 4. Select Loop and press SRC/OK. 5. Select ON or OFF. Autoplay To set the Media player to play tracks automatically when the ignition is switched on: 1. Press  / MENU. 2. Select MEDIA PLAYER and press SRC/OK. 3. Select SETTINGS and press SRC/OK. 4.
Voice recognition Voice recognition Voice recognition ......................... 39 Voice recognition General information CD 50 Multimedia Reader Voice recognition allows you to operate certain functions of a paired Bluetooth mobile phone using a series of programmed voice commands. After pairing a Bluetooth mobile phone and copying phonebook contacts to the Handsfree system, Voice recognition enables you to e.g. call a contact without manually selecting the caller name or number.
40 Voice recognition Using Voice recognition After activating Voice recognition with button s, a system message will ask you to say a voice command or say "Help", to list the voice commands currently available. Following a system message, say a voice command within a few seconds or the system will automatically deactivate. To interrupt a system message at any time, press button s and say a new voice command.
Voice recognition Voice commands Note When the vehicle is stationary, all voice commands are available within the current menu. While driving, the list of available voice commands is reduced, for safety reasons. If the SETTINGS menu is activated during driving, it can only be operated using voice commands. Phone voice commands To access the phone voice commands menu: 1. Press s and wait for the audible signal. 2. Say "Telephone".
42 Voice recognition (Say "DELETE" to delete the last digits entered). 6. Say "Dial" to start the dialling process. To dial an international phone number, enter the international dialling code first, e.g. +44 for UK: ■ Say "Plus" (+), or ■ Say "Zero Zero" (00) followed by the international dialling code. To redial the last dialled telephone number: 1. Press s and say "Telephone". 2. Say "Redial". 3. A system message will ask you to confirm your choice.
Voice recognition 3. Say "Next" to move to the next message. Say "Previous" to move to the previous message. 4. Say "Read" to read the currently selected text message. Say "Re-read" to repeat the currently selected text message. Say "Call" to dial the sender of the currently selected text message. Say "DELETE" to delete the currently selected text message. To delete all text messages: 1. Press s and say "MESSAGE READER". 2. Say "Delete all" to delete all of the messages in the Inbox. 3.
44 ■ ■ ■ ■ ■ ■ Voice recognition Press s and say "Loop" again to switch function on/off.
Voice recognition 3. Say "Delete all". 4. A system message will ask you to confirm your choice. Say "Yes" to confirm or say "No" to cancel the operation. To pair a mobile phone to the Handsfree system: To use the Handsfree phone system, the mobile phone must first be paired to the vehicle via Bluetooth 3 49. To activate the phone pairing procedure using voice commands: 1. Press s and say "SETTINGS". 2. Say "PAIRING". 3. The PIN number is shown on the vehicle display.
46 Voice recognition Helpful hints for voice commands ■ The vehicle's microphone is intended for use by the driver. The microphone is correctly positioned and directed for this purpose, so that you do not need to alter your normal driving position for your voice commands to be recognised by the system. If you speak too far from the vehicle's microphone, e.g., if you are sitting in the rear seats, the system may not recognise your voice command.
Phone Phone General information ..................... 47 Connection ................................... 48 Bluetooth connection ................... 49 Emergency call ............................ 51 Operation ..................................... 52 Mobile phones and CB radio equipment ....................................
48 Phone 9 Warning EU R & TTE Compliance Mobile phones have effects on your environment. For this reason, safety regulations have been prepared which you should make yourself familiar with before you use the telephone. Connection Bluetooth The Bluetooth technology enables the user to make and receive phone calls using preset voice commands or manual controls on the steering wheel in complete safety and comfort while driving, in full compliance with the law.
Phone Handsfree phone system. Searching continues until a paired phone is found. The display message Connecting, indicates that the phone being connected. A confirmation of the connection on the display, shows details of the paired mobile phone. Note When a Bluetooth connection is active, using the handsfree phone system will discharge the mobile phone battery more rapidly.
50 Phone 3. SETTINGS: Select option 4. SRC/OK: Press to confirm your selection 5. R / S: Press to move up/down on the display 6. PAIRING: Select option 7. SRC/OK: Press to confirm your selection The display will show Connecting while the system searches for available devices via Bluetooth. If the your mobile phone has been found by the Handsfree system, a 4digit PIN number will be shown on the display.
Phone When the pairing is complete, the phone is automatically connected to the Handsfree phone system. The mobile phone can then be operated via the Infotainment system controls on the steering wheel. Unpairing a mobile phone from the Handsfree phone system If the maximum amount of paired phones have been used, a new phone can only be paired if an existing phone is unpaired. To unpair a mobile phone, use buttons on the steering wheel: 1. Â / MENU: Press 2. R / S: Press to move up/down on the display 3.
52 Phone Making an emergency call Dial the emergency call number (e.g. 112). The telephone connection to the emergency call centre is set up. Answer when the service personnel questions you about the emergency. 9 Warning Do not end the call until you are requested to do so by the emergency call centre.
Phone Phone settings Select the phone settings option menu: 1.  / MENU: Press 2. R / S: Press to select the SETTINGS option 3. SRC/OK: Press to confirm When the desired phone setting adjustments have been confirmed, press the à / ESC button on the steering wheel to exit the phone menu and save the changes. Restore default phone settings Delete all the data and contacts for all paired phones, and restore the Handsfree system to its original settings, by selecting the following menu options: 1.
54 Phone ■ PHONEBOOK: allows you to view the numbers in your phonebook and select one to make a call. Names in the phonebook are grouped alphabetically. ■ MESSAGE READER: allows you to read the last text message received, call the sender of the message or delete it. You can store up to 20 text messages in a dedicated inbox and listen to them later, call the sender or delete them. You can also set the notification methods for received SMS messages.
Phone When asked by the system whether to copy the contacts list, press SRC/ OK (Yes) or à / ESC (No) button on the steering wheel. Alternatively, say "Yes" or "No" using voice commands 3 39. After a mobile phone contact list has been copied to the Handsfree phone system, every time the phone is connected, the system's phonebook is updated automatically. Note Not all mobile phones copy contact names in the phonebook automatically, but have to be transferred manually, using the mobile phone keypad.
56 Phone Last call To dial a number from the call history lists (e.g. dialled numbers, received calls, missed calls), select the following: 1. Â / MENU: Press 2. R / S: Press to move up/down on the display 3. LAST CALLS: Select option, then press the SRC/OK button to confirm 4. R / S: Press to move up/down on the display and select the desired contact 5. Â / MENU: Press to dial 6.
Phone SMS (Short Message Service) The Infotainment system's integrated SMS Message reader reads incoming text messages on your mobile phone with via Bluetooth over the vehicle's sound system. It is possible store up to 20 SMS messages on the Infotainment system, after which when a new message is received, the oldest message in the inbox will be deleted. The SMS Message reader is capable of recognising and reading any abbreviations and interpreting the most common emoticons, e.g. "Smiley".
58 Phone cancel by pressing the à / ESC button. ■ Delete all: Deletes all messages The system will ask you to Delete all?. Confirm the deletion by pressing the SRC/OK button, or cancel by pressing the à / ESC button. Signal type The SMS Message reader lets you choose from three options for the notification you get when you receive a new text message. To adjust the setting, use the following steering wheel controls: 1.  / MENU: Press 2. R / S: Press to move up/down on the display 3.
Phone Recommendations for fault-free operation: ■ Professionally installed exterior antenna to obtain the maximum range possible, ■ Maximum transmission power 10 watts, ■ Installation of the phone in a suitable spot, consider relevant Note in the Owner's Manual section Airbag system. Seek advice on predetermined installation points for the external antenna or equipment holder and ways of using devices with a transmission power exceeding 10 watts.
60 Index A Add contacts................................. 52 Adjust menu items........................ 12 AF Switching................................. 25 Alternative frequencies (AF)......... 25 AM radio....................................... 22 Audio CDs.................................... 28 Audio formats............................... 34 Audio settings............................... 16 Automatic connection................... 48 Automatic station search.............. 23 Automatic switch-off............
61 G General information 2, 28, 32, 34, 47 GPRS code............................. 39, 52 H Handsfree system......................... 52 Controls..................................... 12 System code............................... 4 Handsfree system with multimedia. 2 I Menus on the display screen........ 12 Message reader (SMS).......... 47, 52 Mobile phones and CB radio equipment ................................ 58 Modes of operation....................... 12 MP3 CDs.....................................
62 S Security code.................................. 4 Selecting the waveband............... 22 Signal type (SMS)......................... 52 Skipping to the next track or previous track............................ 29 SMS Message reader voice commands................................. 39 SMS (Short Message Service) 47, 52 Speech volume....................... 17, 52 Speed dependent volume............ 17 Station search............................... 23 Steering wheel controls..................
