Operation Manual

64 Instruments
Flashes w hen the ignition is on
Fault in the electronic immobiliser system;
the engine ca nnot be started 3 19.
Z
Exhaust emission
Control indicator illuminates and/or flashes
yellow
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Illuminates when the engine is running
F ault in emis sion co ntrol sy ste m. The
permissible emission limits may be
exceeded. Contact a workshop for
assistance im med iately.
If it flashes when the engine is running:
Fault that could lead to ca talytic converter
damage. Ease up on the throttle until the
flashing stops 3 109. Seek the immediate
assista nce of a w orkshop.
v
Airbag systems 3, Belt t ensioners
Control indica tor illuminates red
Illuminates when the engine is running
Fault in the a irbag or belt tensioner system
3 48, 3 57.
I
Engine oil pressure
Control indicator illuminates red
It illuminates when the ignition is switched
on and g oes out shortly after the engine
starts.
Illuminates when the eng ine is running
1. Move out of the flow of traffic as quickly
as possible without impeding other
vehicles.
2. Depress clutch 3.
3. Set manual transmission to neutral, or
with Easytronic 3 place selector lever in
N.
4. Switch off ignition.
Contact a workshop for a ssistance.
Caution
Eng ine lubrication may be interrupted.
This ma y result in damage to the e ngine
and/or locking of the drive wheels.
9 Warning
W hen the engine is off, cons iderably
more force is ne ede d to br ak e an d s tee r.
Do not remove key until vehicle has
come to a standstill, otherwise the
steering colum n lock could engage
unexpectedly.