Specifications
Table Of Contents
- Navi 950/650 / CD 600
- Introduction
- Basic operation
- Radio
- CD Player
- External devices
- Navigation
- General information
- Usage
- Destination input
- Guidance
- Speech recognition
- Phone
- Index
- Navi 900/600 / CD 400plus/400/300
- Introduction
- Radio
- CD Player
- AUX input
- USB port
- Digital picture frame
- Navigation
- General information
- Usage
- Destination input
- Selecting a petrol station as destination after a Fuel level low alert
- Entering an address directly
- Selecting an address from the address book
- Selecting a previous destination
- Selecting an address stored in the myPOIs memory
- Selecting a point of interest
- Selecting a destination from the map
- Selecting a destination via geographic coordinates
- Storing an address in the address book or myPOIs memory
- Editing or deleting a stored address
- Setting the home address
- Travel guide
- Tours
- Guidance
- Dynamic guidance
- Maps
- Symbols overview
- Speech recognition
- General information
- Navigation control
- Phone control
- Phone
- Index
Speech recognition 55
In such a case you need to select
another language for the display if
you want to control the Infotainment
system via voice input. Changing
the display language, see
"Language" in chapter "System
settings" 3 19.
Address input for destinations in
foreign countries
In case you want to enter the address
of a destination located in a foreign
country via voice input, you need to
change the language of the
Infotainment display to the language
of the foreign country.
E.g. if the display is currently set to
English and you want to enter the
name of a city located in France, you
need to change the display language
to French.
Exceptions: If you want to enter
addresses in Belgium, you may
optionally change the display
language to French or Dutch. For
addresses in Switzerland you may
optionally change the display
language to French, German, or
Italian.
For changing the display language,
see "Language" in chapter "System
settings" 3 19.
Input order for destination addresses
The order in which the parts of an
address need to be entered using the
speech recognition system is
dependent on the country where the
destination is located.
■ Austria, Germany:
<city> <street> <house number>
■ Belgium, France, Great Britain:
<house number> <street> <city>
■ Italy, Netherlands, Portugal,
Russia, Spain, Switzerland:
<street> <house number> <city>
Usage
Activating speech recognition
Note
Speech recognition is not available
during an active phone call.
Press the w button on the right side of
the steering wheel.
The audio system mutes, the w
symbol on the display is highlighted,
and a voice output message prompts
you to say a command.
As soon as the speech recognition is
ready for voice input, a beep is heard.
You can now say a voice command to
directly initiate a system function
(e.g. playing a radio station), or to
start a dialogue sequence with
several dialogue steps (e.g. entering
a destination address), see
"Operation via speech commands"
further below.
After a dialogue sequence is finished,
the speech recognition is deactivated
automatically. To initiate another
dialogue sequence, you must activate
the speech recognition again.
Adjusting the volume of voice
prompts
Press the w or ─ buttons on the right
side of the steering wheel.