Specifications

186 Speech recognition
■ "Redialing"
■ "Help"
■ "Cancel"
Example of a dialogue
User: <if a telephone call is active:
press the w button>
User: "Send"
Voice output: "Please, say the
number to send."
(for number input see the dialogue
example for Entering a telephone
number)
User: "Send"
Redialing
The number last dialled is redialled
with the command "Redialing".
Saving
With the command "Save" a
telephone number is stored in the
telephone book under a name (voice
tag).
The name entered must be repeated
once. The pitch and pronunciation
must be as identical as possible for
both name inputs, otherwise the
speech recognition will reject the
inputs.
A maximum of 50 voice tags can be
stored in the telephone book.
Voice tags are speaker-dependent,
i.e. only the person who recorded a
voice tag can open it.
To avoid the start of the recording of
a saved name from being cut off, a
short pause should be left after an
input request.
To be able to use the voice tag
independently of the location, i.e.
including other countries, all
telephone numbers should be
entered with a "plus" character and a
country code.
Commands available:
■ "Save": the inputs are accepted.
■ "Verify": the last input is repeated.
■ "Help"
■ "Cancel"
Example of a dialogue
User: "Save"
Voice output: "Please, say the
number to save"
(for number input see the dialogue
example for Entering a telephone
number)
User: "Save"
Voice output: "Please, say the
nametag to save"
User: <Name>
Voice output: "Please, repeat the
nametag to confirm"
User: <Name>
Voice output: "Saving the nametag"
Deleting
A previously saved voice tag is
deleted with the command "Delete".
Commands available:
■ "Yes"
■ "No"
■ "Help"
■ "Cancel"