Specifications

150 Navigation
Note
The map scale can be changed by
turning the multifunction knob.
Using the eight-way switch on the
multifunction knob 3 76 position the
crosswire on a destination on the
map.
Press the multifunction knob to
confirm the selection.
The Navigation menu is displayed.
Starting route guidance
Select Start navigation to start route
guidance to the displayed address.
Description on route guidance, see
chapter "Guidance" 3 158.
Storing the address
Select Store if you want to store the
displayed address in the address
book or myPOIs memory.
The Store menu is displayed, see
"Storing an address in the address
book or myPOIs memory" below.
Selecting a destination via
geographic coordinates
Press the DEST button and then
select Latitude / Longitude.
A menu that allows the input of
geographic coordinates as
destination address is displayed.
Entering the Latitude coordinate
1. Select Latitude.
2. Turn the multifunction knob to
select N or S (north or south of the
equator).
3. Press the multifunction knob to
confirm the selection.
4. Turn the multifunction knob to
enter the desired degrees of
latitude.
5. Press the multifunction knob to
confirm the entry.
6. Enter the desired values for the
latitude minutes and seconds.