Operation Manual

125Instruments, controls
Board information display 3,
selecting functions
Functions and settings of some
equipment 3 can be accessed via the
board information display.
This is done using the menus and buttons
of the Infotainment System 3 or with the
left adjuster wheel 3 on the steering wheel.
The corresponding menu options then
appear in the next line of the display.
If warning messages from Check-control 3
are shown, the display is blocked for other
information. Confirm the warning
message. If there are several warning
messages, confirm these in succession.
Selection with arrow keys
Select the menu points using the buttons
on the Infotainment system
OK button
Select marked point, confirm command.
Select using the left adjuster wheel 3 on
the steering wheel
Turn up
Previous menu point.
Turn down
Next menu point.
Press
Select marking, confirm commands.
System settings – see page 131.
Trip computer – see page 128.
11:25} 21.5°C
Range
257miles