Operation Manual

113Instruments, controls
Illuminates
Fault in Open&Start system.
Lock or unlock vehicle using remote
control or emergency key if necessary, see
page 43, or attempt to use the spare key.
Emergency operation, see page 44.
If
0 illuminates, this can also mean that
the steering column lock is still locked:
move steering wheel to and fro a little and
press Start/Stop button again.
If
0 illuminates whilst driving a system
error has occurred that may eventually
lead to a complete failure.
If
0 illuminates or flashes: The Start/Stop
button must be held depressed somewhat
longer to switch off the ignition. It is
possible that the vehicle will not start
during the next start attempt.
If these flash continuously or if
0
illuminates, contact a workshop
immediately.
I
Engine oil pressure
Control indicator illuminates red.
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Illuminates when the engine is running
Engine lubrication may be interrupted. This
may result in damage to the engine and/or
locking of the drive wheels:
1. Move out of the flow of traffic as quickly
as possible without impeding other
vehicles.
2. Depress clutch.
3. Shift manual transmission or
Easytronic 3 into neutral; for automatic
transmission 3, set selector lever to N.
4. Switch off ignition.
Contact a workshop for assistance.
9 Warning
When the engine is off, considerably
more force is needed to brake and steer.
Do not remove key until vehicle has come
to a standstill, otherwise the steering
column lock could engage unexpectedly.