Operation Manual

77Seats, Interior
Picture no: 17079t.tif
To cover the gap between the luggage
compartment cover and the rear
backrests, there is a cover on the cartridge.
Attach the two hooks of the cover to the
head restraint guide rods. If the safety net
is mounted, run the hooks through the net
mesh.
Picture no: 17080t.tif
Removing
Open the luggage compa rtm ent c ov er and
detach the hooks from the head restraints.
Move release lever on right side of luggage
compartment cover upward. Lift right
cover and remove from brackets.
Fitting
Insert the luggage compartment cover in
the recess on the left, press the release
lever on the right side upward, insert the
cover in the recess on the right, engage
and press the lever down.
Attach the hooks on the head restraints -
see Fig. 17079 T.